Uses of Package
uk.ac.manchester.spinnaker.messages.model
Packages that use uk.ac.manchester.spinnaker.messages.model
Package
Description
Java client for the SpiNNaker allocation service.
Classes used to model types of connections that talk to SpiNNaker.
Messages that talk to the BMP.
Messages used to boot a SpiNNaker board.
Model support classes for the communication messages.
The messages of SpiNNaker Control Protocol (SCP).
SpiNNaker old-style machine allocation client.
How to actually talk to a SpiNNaker machine.
-
Classes in uk.ac.manchester.spinnaker.messages.model used by uk.ac.manchester.spinnaker.alloc.client
-
Classes in uk.ac.manchester.spinnaker.messages.model used by uk.ac.manchester.spinnaker.connectionsClassDescriptionContains the details of a connection to a SpiNNaker Board Management Processor (BMP).
-
Classes in uk.ac.manchester.spinnaker.messages.model used by uk.ac.manchester.spinnaker.messages.bmpClassDescriptionContainer for the board status data thats been retrieved from a BMP.The IP addresses associated with a SpiNNaker board.Identifiers for the FPGAs on a SpiNNaker board, as managed by BMP.The SCP LED actions.The BMP Power Commands.Indicate that a response code returned from the board was unexpected for the current operation.Decodes SC&MP/SARK version information as returned by the SVER command.
-
-
Classes in uk.ac.manchester.spinnaker.messages.model used by uk.ac.manchester.spinnaker.messages.modelClassDescriptionApplication identifiers are used by SCAMP to tie various resources to their owners.SARK CPU States.Enum for data types of system variables.Default routing flags for the diagnostic filters.Destination flags for the diagnostic filters.Emergency routing status flags for the diagnostic filters.How to get the bit index of an enum value.Packet type flags for the diagnostic filters.Payload flags for the diagnostic filters.Source flags for the diagnostic filters.Basic information about firmware.Identifiers for the FPGAs on a SpiNNaker board, as managed by BMP.FPGA registers within a register bank.Main FPGA registers.FPGA link receive counters.FPGA link send counters.The values used by the SCP IP tag time outs.The SCP LED actions.Commands sent between an application and the monitor processor.P2P Routing table routes.The BMP Power Commands.Description of router registers.A router timeout, originally stored as an 8-bit unsigned float.SARK Run time errors.A field that has an equivalent in a structure in SARK (or SCAMP, or the BMP).A structure that has an equivalent in a structure in SARK (or SCAMP, or the BMP).The supported APIs for mapped structures.SCP Signals.The type of signal, determined by how it is transmitted.Defines the system variables available.What to move data in units of.Indicate that a response code returned from the board was unexpected for the current operation.A three-part semantic version description.
-
Classes in uk.ac.manchester.spinnaker.messages.model used by uk.ac.manchester.spinnaker.messages.scpClassDescriptionApplication identifiers are used by SCAMP to tie various resources to their owners.Represents the chip summary information read via an SCP command.SARK CPU States.The values used by the SCP IP tag time outs.The SCP LED actions.Indicate that a memory allocation operation has failed.Represents a status information message obtained from the dropped packet reinjection core (an "extra monitor" core).SCP Signals.Description of a tag.Information about a tag pool on an Ethernet-connected chip.Indicate that a response code returned from the board was unexpected for the current operation.Decodes SC&MP/SARK version information as returned by the SVER command.
-
Classes in uk.ac.manchester.spinnaker.messages.model used by uk.ac.manchester.spinnaker.spalloc
-
Classes in uk.ac.manchester.spinnaker.messages.model used by uk.ac.manchester.spinnaker.transceiverClassDescriptionContainer for the board status data thats been retrieved from a BMP.Application identifiers are used by SCAMP to tie various resources to their owners.A blacklist read off a board.Contains the details of a connection to a SpiNNaker Board Management Processor (BMP).Represents the system variables for a chip, received from the chip SDRAM.Represents information about the state of a CPU.SARK CPU States.A router diagnostic counter filter, which counts packets passing through the router with certain properties.Encapsulate the binaries and cores on which to execute them.A firmware descriptor.Basic information about firmware.Identifiers for the FPGAs on a SpiNNaker board, as managed by BMP.FPGA registers within a register bank.Main FPGA registers.FPGA link receive counters.FPGA link send counters.An element of one of the heaps on SpiNNaker.The contents of IOBUF for a core.The SCP LED actions.The BMP Power Commands.Represents a status information message obtained from the dropped packet reinjection core (an "extra monitor" core).Represents a set of diagnostic information available from a chip router.A router timeout, originally stored as an 8-bit unsigned float.SCP Signals.Defines the system variables available.A three-part semantic version description.Decodes SC&MP/SARK version information as returned by the SVER command.